Sale
Compare up to 3 products now
0 Item selected for comparison
- Raider Pants MK V ATSThe CLAWGEAR® Raider Field Pants are the lightest, most durable pants for extended deployment tasks. The ergonomic design and CLAWGEAR® ATS materials allow an unrestricted range of movement. The lightweight material significantly reduces water pick-up and offers faster drying times while DARKSTONE™ provides enhanced abrasion resistance and durability. The Raider pants feature eight pockets with the ability for personal equipment attachment. The product is constructed using twin-needle sewing for strength and flat-locked seams for comfort. Fine-tuning of fit is achievable through hook-and-loop waist tabs, external leg tabs with hook-and-loop adjustment, and an internal knee locking cord.CHF 274.90 - CHF 319.90
Majority stocked
- Raider Pants MK VThe CLAWGEAR® Field Shirt is a medium weight, fast-drying product for use by military and law enforcement professionals. The CLASSIC configuration uses a 220 GSM (6.5O PSY) 50% Nylon and 50% Cotton rip-stop textile. The Raider pants feature eight pockets with the ability for personal equipment attachment. The product is constructed using twin-needle sewing for strength and flat-locked seams for comfort. Fine-tuning of fit is achievable through hook-and-loop waist tabs, external leg tabs with hook-and-loop adjustment, and an internal knee locking cord.CHF 196.90 - CHF 252.90
Majority stocked
- Operator Combat Pants MK III ATSThe CLAWGEAR® Operator Combat Pants have been configured for light and fast, short-duration tasks. They feature a lower profile design and the CLAWGEAR® ATS materials allow an unrestricted range of movement. The lightweight material significantly reduces water pick-up and offers faster drying times while DARKSTONE™ provides enhanced abrasion resistance and durability. The Operator Combat Pants feature four pockets with the ability for personal equipment attachment. The lower leg also has the provision for the attachment of items such as IR beacons or tourniquets depending on task or unit procedures. The product is constructed using twin-needle sewing with all seams flat-locked for comfort. Fine-tuning of fit is achievable through hook-and-loop waist tabs, external leg tabs with hook-and-loop adjustment, and an internal knee locking cord.CHF 264.90 - CHF 309.90
Majority stocked
- Raider Combat Shirt MK VThe CLAWGEAR® Combat Shirt Classic is a medium weight, fast-drying product for use by military and law enforcement professionals. The CLASSIC configuration uses a 220 GSM (6.5O PSY) 50% Nylon and 50% Cotton rip-stop textile. Designed to be worn as a stand-alone item or below ballistic protection carriers or stab-resistant vests. The ergonomic design and low-profile seams provide exceptional next-to-skin comfort and freedom of movement while the highly breathable textile supports evaporative cooling in higher temperatures. Careful consideration has been given to color mapping to insure that camouflage patterns and colors provide the maximum level of coverage. The material used in the exposed is a CLAWGEAR® development that allows mechanical stretch for an extended range of movement. On both upper arms, a low-profile storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates Velcro® loop patches and webbings feature for the attachment of IFF indicators, V-LITE®, or other unit items.CHF 152.90 - CHF 186.90
In stock
- Operator Field Shirt MK III ATSThe CLAWGEAR® ATS Operator Field Shirt is a next-generation battle dress field shirt. It takes the DNA and learning from the original CLAWGEAR® field shirt and brings it to a new level. The new design is lighter, faster drying, more breathable, and provides an extended range of movement due to the use of our ATS technology Careful consideration has been given to the color mapping to insure that camouflage patterns and colors do not contrast. Upper arms feature low-profile storage pockets with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items or other equipment. The outer upper sleeve incorporates VELCRO® loop patches and webbing features for the attachment of IFF indicators, V-Lite®, or other unit items.CHF 252.90 - CHF 296.90
In stock
- Raider Field Shirt MK VThe CLAWGEAR® Field Shirt is a medium weight, fast-drying product for use by military and law enforcement professionals. The CLASSIC configuration uses a 220 GSM (6.5O PSY) 50% Nylon and 50% Cotton rip-stop textile. The new design is lighter, faster drying, more breathable, and provides an extended range of movement due to the use of our ATS technology. This style is designed with extended deployment and multi-role capability. The ergonomic design includes mesh venting in the front pockets and rear darts. The provision for belt-mounted side arms has been included using zippered access. Careful consideration has been given to the color mapping to insure that camouflage patterns and colors do not contrast. On both upper arms, a bellows-style storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates bellows pockets VELCRO® loop patches and webbing features for the attachment of IFF indicators, V-Lite®, or other unit items.CHF 174.90 - CHF 219.90
In stock
- Raider Field Shirt MK V ATSThe CLAWGEAR® ATS Raider Field Shirt is a next-generation battle dress field shirt. It takes the DNA and learning from the original CLAWGEAR® field shirt and brings it to a new level. The new design is lighter, faster drying, more breathable, and provides an extended range of movement due to the use of our ATS technology. This style is designed with extended deployment and multi-role capability. The ergonomic design includes mesh venting in the front pockets and rear darts. The provision for belt-mounted side arms has been included using zippered access. Careful consideration has been given to the color mapping to insure that camouflage patterns and colors do not contrast. On both upper arms, a bellows-style storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates bellows pockets VELCRO® loop patches and webbing features for the attachment of IFF indicators, V-Lite®, or other unit items.CHF 252.90 - CHF 296.90
In stock
- Raider Combat Shirt MK V ATSThe CLAWGEAR® Raider Combat Shirt is a lightweight, fast-drying product for use by military and law enforcement professionals. Designed to be worn as a stand-alone item or below ballistic protection carriers or stab-resistant vests. The ergonomic design and low-profile seams provide exceptional next-to-skin comfort and freedom of movement while the highly breathable textile supports evaporative cooling in higher temperatures. Careful consideration has been given to color mapping to insure that camouflage patterns and colors provide the maximum level of coverage. The material used in the exposed is a CLAWGEAR® development that allows mechanical stretch for an extended range of movement. On both upper arms, a bellows-style storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer sleeve incorporates bellows pockets, VELCRO® loop patches, and webbing features for the attachment of IFF indicators, V-Lite, or other unit items.CHF 219.90 - CHF 259.90
In stock
- Operator Combat Shirt MK III ATSThe CLAWGEAR® Combat Shirt is a lightweight, fast-drying product for use by military and law enforcement professionals. Designed to be worn as a stand-alone item or below ballistic protection carriers or stab-resistant vests. The ergonomic design and low-profile seams provide exceptional next-to-skin comfort and freedom of movement while the highly breathable textile supports evaporative cooling in higher temperatures. Careful consideration has been given to color mapping to insure that camouflage patterns and colors provide the maximum level of coverage. The material used in the exposed is a CLAWGEAR® development that allows mechanical stretch for an extended range of movement. On both upper arms, a low-profile storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates Velcro® loop patches and webbings feature for the attachment of IFF indicators, V-LITE®, or other unit items.CHF 219.90 - CHF 252.90
In stock
- AK47 Long Slick Handguard M-LOK• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finishCHF 179.90
In stock
- AK47 Medium Slick Handguard M-LOK• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finishCHF 162.90
In stock
- SG550 High Profile Mount BaseClawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.AIMING BOREMakes the use of the original diopter sights possible.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the ri_x001E_ e with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.CHF 144.90
In stock
- Greece Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- Poland Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- AK47 Gas Tube CoverThe Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coatingCHF 109.90
In stock
- SG550 Low Profile Mount BaseClawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the rifle with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.CHF 99.90
In stock
- Bundesheer PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 7.90
In stock
- AUG Modular Scope MountClawgear‘s modular mounting system products are designed to increase weapon performance and accuracy. Due to its glass fibre reinforced polymer construction, this rugged and high quality item will serve you in any combat situation. The Modular Scope Mount protects the original optics of AUG rifles and provides mounting possibilites for various Picatinny based accessories.NATO STANAG 4694 RailThe integrated 16 slot Picatinny Rail allows the user to upgrade his AUG rifle with various aiming devices or accessories.Lightweight ConstructionAlthough this mount base has been designed in a lightweight way, its mechanical strength is enhanced by the use of glass fiber reinforced polymer.Mounting PossibilitesAdditional side rails (sold seperately) can be attached to both sides of the AUG MSM to provide additional mounting spots for further equipment.Reduced Infrared SignatureThis accessory part features reduced infrared singature.Flip-Up CoversTwo flip-up covers (included) protect the lenses of the scope from rain, dust, debris and mud.InstallationMake sure your weapon is unloaded and safe. Take the left half-shell (the one without top rail) and place it on the scope by pushing it over the diagonal fixing screw of the scope. Then push the right half-shell into the corresponding slots on the left part until it clicks in. Make sure that all engagement hooks are snapped in. Place each hexagon nut in the clearance of the right shell and tighten the corresponding screw from the left shell side. Mount the included flip-up covers to protect the original scope glass.CompatibilitySteyr AUG A1/A2, AUG P, AUG Z, AUG LMG variants, AUG SA variants, F88 Austeyr. Applies to all variants with 1,5x standard Steyr scope.CHF 149.90
In stock
- Switzerland Small Tab PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 4.90
In stock
- Turkey Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- Croatia Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- SaleField ShortThe Field Short has especially been drafted for the use under hot climate conditions and closes the gap between comfort and functional capabilty in this area. It features the proven waist adjustment system with elastic components for better comfort and absorption of body movements. The integrated main thigh pockets offer sufficient room and provide a seperate compartment for the user's smartphone – everything is accessible even when wearing gloves. A small pocket on outside of the thigh is construed to stow a knife or a pistol mag.The Field Short comes with some more features: The belt area is optimized for rigger & safety belts as well as for suspenders and is comfortable due to the use of soft materials. On the inner backside is a hidden pocket which can be used for documents, e.g. a passport. Despite its comfortable fit, the pants robustness and reduced nIR signature (not valid for MultiCam Polycotton) are outstanding. 'YKK' zippers and high-grade sewing threads have been processed. All main seams are triple stitched for extra durability, many heavily used spots are furthermore reinforced with bartack stitches.Excellent wearing comfort, perfect fit and ease of movementOptimized for safety & rigger belts useTriple stitched main seams, reinforced areas via bartack stitchesRobust materialsCHF 44.90 - CHF 69.90 CHF 89.90 - CHF 137.90
In stock
- SaleRaider Mk.IV PantThe Raider Mk.IV mission pant has been designed to be simple and lightweight assault pants, featuring extremely useful extras and greatest possible comfort for today's war fighters. It features an improved waist adjustment system with elastic components for better comfort and absorption of body movements. The pocket concept has been optimized; cargo pockets have been extended with an an additional compartment which is accessible from outside and holds a 30rds magazine for rapid access. Profound modifications apply to the knee area which is now equipped with a handy inward knee height adjustment. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the the button holes which have been integrated for this reason into the pant conception.The Raider Mk.IV Pant's durability and body fit makes this it suitable for all battlefield missions and every day carry as well. The belt area is optimized for rigger & safety belts as well as for suspenders. Front Pockets allow fast and easy access also with gloves. Cargo Pockets provide a lot of space for your equipment and also include an extra zip-pocket. The inside knee area is equipped with a special fabric to provide optimum sweat absorption. 'YKK' zippers and 'Amann' sewing threads have been processed, all main seams are triple stitched for extra durability.Outstanding wearing comfort and anatomic fitOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signatureCHF 123.68 - CHF 157.43 CHF 164.90 - CHF 209.90
In stock
- Suisse Tab PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 5.90
In stock
- Switzerland Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- AUG MSM 10 Slot RailClawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 10 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)CHF 29.90
In stock
- G36 / SG751 SAPR Mag Pouch LCClawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The G36/SG751 SAPR Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single G36 / SG751 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 14cmWidth: 9,5cmDepth: 3cmCHF 33.90
In stock
- Ukraine Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- Ireland Flag PatchThe woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.CHF 6.90
In stock
- Radio Pouch for Harris PRC-152The radio pouch is designed to fit AN/PRC-152, AN/PRC-148, and other similarly sized handheld radios. The pocket can be opened to easily access the screen and buttons without removing the radio device. The pouch is closed and secured using a reliable polymer buckle and two velcro-padded shock cords. The bottom has a zipper for easy battery access.The pouch consists of two main parts - a mounting plate and the radio compartment.The mounting part is manufactured of a 500D Nylon base fitted with two aluminum tubes that guarantee rigid construction. It has two PALS straps for easy attachment to virtually any PALS-based vest, backpack, or other gear-carrying systems. An extra side strap with a polymer buckle helps furtherly stabilize the pouch to maximize comfort and performance.The radio compartment is made from the same 500D Nylon, foam, and durable laminate. The device in the pouch is secured in its place with a shock cord. Utilized materials guarantee extreme robustness and resistance to physical and typical "deployment" damage with full access to all control knobs. The bottom-placed zipper is used for battery replacement in the field without removing the radio from the pouch.Both parts are sewn together at the bottom and connected with a pull tab on top. This allows the pouch to pivot outward for quick and easy access to the screen and buttons. Additional loops of double-sided velcro on the sides grant an easy way to secure and organize cables connecting the radio with the PTT button or other small items like chemlights.Fabrics:500D NylonTacticoat ReinforcedNylon WebbingYKK ZippersWooJin BucklesDimensions:Height: 24cmWidth: 9cmDepth: 5cmPALS space: 2 X 3 (minimal) 2 X 4 (optimal).CHF 72.90
In stock
Sort: