Equipment

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Mission Sensor II is a reliable timepiece for military and law enforcement operators providing a high level of functionality. Featuring high-density polycarbonate case, black-ops design without any reflective metal parts, digital compass, barometer, altimeter and many more. Black matrix display with backlight toggle provides best possible visibility under difficult conditions. The button tones for using the mode button can be turned off.Features:High-density polycarbonate caseHardened acryl glassTear-resistant rubber bracelet with black anodized buckleWater reistant 3 ATM / 30m1 x CR2032Functions:Digital compassAltimeter (-706m to +9164m, data will be stored for 34h)Barometer (0.1mbar, 300 to 1100mbar, data will be stored for 34h)Thermometer (0.1°C, -10° to +60°, °C or °F, data will be stored for 34h)Second time zoneAlarm functionStopwatch function (1/100 sec accuracy, 100 h)Countdown timer (1 sec, 100 h)Digital calendar12/24-hour calendarElectro-luminescent backlightMagnetic declination adjustableEnergy save mode (display deactivated)Low battery indication==__ABMESSUNGEN__==Height: 14.5mmDiameter: 46.4mmBracelet width: 22mm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Steel: AUS-8Weight knife: 140 gWeight sheath: 125 g

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Tourniquet Pouch was designed to give the user easy, ambidextrous access to the Tourniquet. The Pouch can be mounted horizontal or vertical due to its double mounting option (standard MOLLE or double-sided fastener loops). The semi-closed design keeps the Tourniquet safe and prevents it from getting dirty.Features:Designed for common tourniquetsMade of 500D NylonMOLLE system compatibleDouble-sided fastener loops allow horizontal mountingTourniquet accessible from both pouch endsFabrics:500D NylonNylon WebbingDimensions:Height: 14cmWidth: 5,5cmDepth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The G36/SG751 SAPR Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single G36 / SG751 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 14cmWidth: 9,5cmDepth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The QA Two Point Sling QD Swivel is a classic length adjustable two-point sling. Both sling ends have a steel QD swivel.Features:Fully adjustable two-point SlingPull Tab for fast length adjustmentQD Swivel at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingCompatible with all Clawgear Front/End KitsFabrics:32mm Polyamide WebbingSteel QD SwivelsACW and ITW Nexus plastic parts

Microsac

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A single HK417 Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single HK417 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 15cmWidth: 10cmDepth: 3cm

Reliable timepiece for military and law enforcement operators providing a high level of functionality. The Dual Timer has been developped due to very frequent demands for a dial which provides analog as well as digital functions. Featuring high-density polycarbonate case, black-ops design without any reflective metal parts, digital compass, world timer, alarm mode, chronograph and many more. White hands and black matrix display with backlight toggle provide great visibility under difficult conditions. The button tones for using the mode button can be turned off.Features:High-density polycarbonate caseHardened acryl glassTear-resistant rubber bracelet with black anodized buckleWater reistant 3 ATM / 30m1 x CR2032Functions:Digital compassWorld TimerAlarm functionStopwatch function (1/100 sec accuracy, 100 h)Countdown timer (1 sec, 100 h)Digital calendar12/24-hour calendarElectro-luminescent backlightMagnetic declination adjustableEnergy save mode (display deactivated)Low battery indication==__ABMESSUNGEN__==Height: 15mmDiameter: 45mmBracelet width: 22mm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The 6" lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The LeveL 1-L Belt is a classic every day carry trouser belt made of military grade materials with a Austrialpin Cobraframe closure.Features:Made of Nylon WebbingLightweightAustrialpin CobraframeSuitable for EDCFabrics:45mm Nylon Webbing

Our most versatile piece of equipment, a must have accessory for every basic configuration. Attaching a cable switch on your front grip, fixing your light-sticks on your plate carrier, holding your tourniquet on the shoulder straps of your vest and many more.Mil Spec, made from highest grade natural rubber. Made in USADimensions: 1-1/4 x 3/8 x .062 inches each

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The radio pouch is designed to fit AN/PRC-152, AN/PRC-148, and other similarly sized handheld radios. The pocket can be opened to easily access the screen and buttons without removing the radio device. The pouch is closed and secured using a reliable polymer buckle and two velcro-padded shock cords. The bottom has a zipper for easy battery access.The pouch consists of two main parts - a mounting plate and the radio compartment.The mounting part is manufactured of a 500D Nylon base fitted with two aluminum tubes that guarantee rigid construction. It has two PALS straps for easy attachment to virtually any PALS-based vest, backpack, or other gear-carrying systems. An extra side strap with a polymer buckle helps furtherly stabilize the pouch to maximize comfort and performance.The radio compartment is made from the same 500D Nylon, foam, and durable laminate. The device in the pouch is secured in its place with a shock cord. Utilized materials guarantee extreme robustness and resistance to physical and typical "deployment" damage with full access to all control knobs. The bottom-placed zipper is used for battery replacement in the field without removing the radio from the pouch.Both parts are sewn together at the bottom and connected with a pull tab on top. This allows the pouch to pivot outward for quick and easy access to the screen and buttons. Additional loops of double-sided velcro on the sides grant an easy way to secure and organize cables connecting the radio with the PTT button or other small items like chemlights.Fabrics:500D NylonTacticoat ReinforcedNylon WebbingYKK ZippersWooJin BucklesDimensions:Height: 24cmWidth: 9cmDepth: 5cmPALS space: 2 X 3 (minimal) 2 X 4 (optimal).

Special Limited Edition

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Vertical Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting of various accessories.Features:Medium Vertical Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 18cmWidth: 15cmDepth: 7cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The One Point Elastic Support Sling Snap Hook is a classic one-point elastic sling. The sling end has a steel snap hook for attaching to various sling swivels or loops. The Snap Hook is covered with an elastic webbing collar to prevent weapon from scratching.Features:Fully adjustable elastic one-point SlingSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingSwappable rifle mounting optionsTubular Webbing with stretchable sectionCompatible with all Clawgear Front End KitsFabrics:25mm Tubular Webbing500D Nylon bonded with NBR fabricACW and ITW Nexus plastic partsSteel Snap Hook

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The One Point T-End Sling Snap Hook is a one-point sling, which is suited for direct MOLLE mounting. The sling end has a Snap Hook which is covered with an elastic webbing collar to prevent weapon from scratching.Features:Fully adjustable one-point SlingSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingDifferent mounting options can be added at each sling endStiff Nylon Webbing with stretchable sectionCompatible with all Clawgear Front End KitsFabrics:25mm Nylon WebbingSteel Snap HookACW and ITW Nexus plastic parts

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Large Horizontal Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting various accessories.Features:Large Horizontal Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 15cmWidth: 26cmDepth: 7cm