Sacchetti

Confronta subito fino a 3 prodotti
0 Articoli selezionati per il confronto
Selezionate fino a tre prodotti da confrontare facendo clic sull'icona accanto al prodotto corrispondente nell'elenco dei prodotti.
Selezionate fino a tre prodotti da confrontare facendo clic sull'icona accanto al prodotto corrispondente nell'elenco dei prodotti.
Selezionate fino a tre prodotti da confrontare facendo clic sull'icona accanto al prodotto corrispondente nell'elenco dei prodotti.
    Smistamento:
    Filtro
  • Clawgear Drop Down Velcro Utility Pouch
    Drop Down Velcro Utility Pouch
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Drop Down Velcro Utility Pouch is a multipurpose organizer with the capability of mounting bellow a plate carrier using the fastener flap or direct to a belt with the use of rear webbing loops. The pouch is designed to extend storage in the most convenient way, providing easy access to its contents. It has multiple pockets, elastic webbing organizers and loops for a variety of accessories (multitool, lightsticks etc.)Dangler pouchExternal flat zip pocketMade of 500D NylonMOLLE system compatiblePatch SurfaceInternal flat mesh pocket for better visibilityFastener flap for attaching under a Plate CarrierElastic webbing loops for various accessoriesFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 15cmWidth: 25cm
    52,90 CHF

    In magazzino

  • Clawgear GPS Pouch LC for Garmin GPSmap
    GPS Pouch LC for Garmin GPSmap
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Garmin GPSmap pouch is designed for this unit or similar in size. The pouch can be unfolded to easily access the screen and buttons without taking out the device. The GPS holding compartment has a transparent foil for additional screen protection. The pouch closing flap has a special cutout for the GPS antenna and it’s closed with a plastic buckle.Features:Designed for handheld GPS Devices such as Garmin or similar in sizeMade of 500D Nylon and bonded Laminate for extreme robustnessPlastic buckle closure/openingMOLLE system compatibleFoldable opening for easy radio accessFabrics:500D Nylon bonded with NBR fabric500D NylonWoojin plastic partsNylon WebbingDimensions:Height: 12cmWidth: 6,5cmDepth: 3,5cm
    32,90 CHF

    In magazzino

  • Clawgear Large Horizontal Utility Pouch LC
    Large Horizontal Utility Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Large Horizontal Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting various accessories.Features:Large Horizontal Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 15cmWidth: 26cmDepth: 7cm
    43,90 CHF

    In magazzino

  • Clawgear HK417 Mag Pouch LC
    HK417 Mag Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A single HK417 Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single HK417 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 15cmWidth: 10cmDepth: 3cm
    33,90 CHF

    In magazzino

  • Clawgear G36 / SG751 SAPR Mag Pouch LC
    G36 / SG751 SAPR Mag Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The G36/SG751 SAPR Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single G36 / SG751 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 14cmWidth: 9,5cmDepth: 3cm
    33,90 CHF

    In magazzino

  • Clawgear Small Vertical Utility Pouch LC
    Small Vertical Utility Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Small Vertical Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting of various accessories.Features:Small Vertical Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEInternal flat pocketMOLLE system compatibleLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 12cmWidth: 10cmDepth: 6cm
    34,90 CHF

    In magazzino

  • Clawgear Pistol Mag Holder
    Pistol Mag Holder
    Clawgear's nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible without diminishing performance and reliability. The use of bonded Reinforced materials at the same time massively increases the durability and lifetime, maintaining a low weight.Pistol Mag Holder is a "male" Velcro-padded insert designed for organizing storage and transport space in backpacks and cases. The holder is shaped for carrying pistol magazines and other similarly-sized equipment. It is easily attached to "female" Velcro or velour panels for optimizing hold space and volume of cases.Features:Designed to store pistol magazines or other similarly-sized objectsMale Hook panel for easy attachmentFour carry slotsAdditional carry loopReinforced stitchingFabrics:Elastic Mil-Spec WebbingMale Hook Fastener.
    10,90 CHF

    In magazzino

  • Clawgear Medium Vertical Utility Pouch Zipped Core
    Medium Vertical Utility Pouch Zipped Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Vertical Utility Pouch Zipped Core is made to extend storage space. External flat zipped pocket allows for storing additional flat items, maintaining a low-profile design.Features:Medium Vertical Utility PouchMade of 500D NylonMOLLE system compatibleExternal flat zipped pocketInternal flat pocketLow Profile DesignFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 18cmWidth: 15cmDepth: 7cm
    31,90 CHF

    In magazzino

  • Clawgear 5.56mm Mag Pouch LC
    5.56mm Mag Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A single 5.56mm Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single 5.56mm Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 14cmWidth: 8cmDepth: 2,5cm
    27,90 CHF

    In magazzino

  • Clawgear Radio Pouch for Harris PRC-152
    Radio Pouch for Harris PRC-152
    The radio pouch is designed to fit AN/PRC-152, AN/PRC-148, and other similarly sized handheld radios. The pocket can be opened to easily access the screen and buttons without removing the radio device. The pouch is closed and secured using a reliable polymer buckle and two velcro-padded shock cords. The bottom has a zipper for easy battery access.The pouch consists of two main parts - a mounting plate and the radio compartment.The mounting part is manufactured of a 500D Nylon base fitted with two aluminum tubes that guarantee rigid construction. It has two PALS straps for easy attachment to virtually any PALS-based vest, backpack, or other gear-carrying systems. An extra side strap with a polymer buckle helps furtherly stabilize the pouch to maximize comfort and performance.The radio compartment is made from the same 500D Nylon, foam, and durable laminate. The device in the pouch is secured in its place with a shock cord. Utilized materials guarantee extreme robustness and resistance to physical and typical "deployment" damage with full access to all control knobs. The bottom-placed zipper is used for battery replacement in the field without removing the radio from the pouch.Both parts are sewn together at the bottom and connected with a pull tab on top. This allows the pouch to pivot outward for quick and easy access to the screen and buttons. Additional loops of double-sided velcro on the sides grant an easy way to secure and organize cables connecting the radio with the PTT button or other small items like chemlights.Fabrics:500D NylonTacticoat ReinforcedNylon WebbingYKK ZippersWooJin BucklesDimensions:Height: 24cmWidth: 9cmDepth: 5cmPALS space: 2 X 3 (minimal) 2 X 4 (optimal).
    72,90 CHF

    In magazzino

  • Clawgear Medium Horizontal Utility Pouch LC
    Medium Horizontal Utility Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Horizontal Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting of various accessories.Features:Medium Horizontal Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 13cmWidth: 20cmDepth: 6cm
    34,90 CHF

    In magazzino

  • Clawgear Medium Horizontal Utility Pouch Zipped Core
    Medium Horizontal Utility Pouch Zipped Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Horizontal Utility Pouch Zipped Core is made to extend storage space. External flat zipped pocket allows for storing additional flat items, maintaining a low-profile design.Features:Medium Horizontal Utility PouchMade of 500D NylonMOLLE system compatibleExternal flat zipped pocketInternal flat pocketLow Profile DesignFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 13cmWidth: 20cmDepth: 6cm
    31,90 CHF

    In magazzino

  • Clawgear Dump Pouch Core
    Dump Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Dump Pouch Core is classic design which utilizes an adjustable opening with a lightweight nylon aperture. The Dump pouch can be folded and stored in a small package by securing it with a fastener flap.Features:Large Dump PouchMade of 500D NylonMOLLE system compatibleRollup Feature for compressed storageThree Large drainages for keeping dirt away from the dump pouchFabrics:500D NylonNylon WebbingDimensions:Height: 29cmWidth: 22cm
    36,90 CHF

    In magazzino

  • Clawgear Detonator Pouch
    Detonator Pouch
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Detonator pouch is designed for common detonation cords. Multiple elastic webbing compartments allow easy cord placement and provides an easy tangle free access.The pouch can be stored either flat or rolled (bungee cord closure). It can be optional mounted with MOLLE clips by using the laser cutouts on its back.Features:Designed for Detonation cordsMade of lightweight Nylon fabricMultiple elastic webbing compartments for easy and tangle free storageFabrics:Lightweight Nylon fabricDimensions:Height: 28,5cmWidth: 21,5cm
    43,90 CHF

    In magazzino

  • Clawgear 2-Way Tourniquet Pouch
    2-Way Tourniquet Pouch
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Tourniquet Pouch was designed to give the user easy, ambidextrous access to the Tourniquet. The Pouch can be mounted horizontal or vertical due to its double mounting option (standard MOLLE or double-sided fastener loops). The semi-closed design keeps the Tourniquet safe and prevents it from getting dirty.Features:Designed for common tourniquetsMade of 500D NylonMOLLE system compatibleDouble-sided fastener loops allow horizontal mountingTourniquet accessible from both pouch endsFabrics:500D NylonNylon WebbingDimensions:Height: 14cmWidth: 5,5cmDepth: 3cm
    22,90 CHF

    In magazzino

  • Clawgear 5.56mm / AK Double Speedpouch LC
    5.56mm / AK Double Speedpouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear 5.56/AK Double Speedpouch is a hybrid construction that utilizes a double plastic retention frame to hold tight two rifle magazines without the need of a classic bungee retention pull tab, providing the user with a fast mag draw. The pouch retention is easy and fast to adjust. External MOLLE laser cut-outs allow pouch stacking.Features:Designed to hold two 5.56/AK MagazinesMade of bonded Laminate for extreme robustnessMOLLE system compatibleExternal Laser cut MOLLE for pouch stackingEasy and fast Magazine Retention adjustmentPlastic Retention Frame for tight magazine fitLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 12cmWidth: 8cmDepth: 6cm
    34,90 CHF

    In magazzino

  • Clawgear 5.56mm Open Double Mag Pouch Core
    5.56mm Open Double Mag Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic double Magazine Shingle with adjustable bungee cord pull tab retention. External MOLLE webbing for pouch stacking.Features:Designed for two 5.56 / AK MagazinesMade of 500D NylonMOLLE system compatibleAdjustable Magazine RetentionFabrics:500D NylonNylon WebbingDimensions:Height: 13cmWidth: 17cmDepth: 2cm
    28,90 CHF

    In magazzino

  • Clawgear 9mm Speedpouch LC
    9mm Speedpouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear Speedpouch is a hybrid construction that utilizes a plastic retention frame to hold tight a single pistol magazine without the need of a classic bungee retention pull tab, providing the user with a fast mag draw. The pouch retention is easy and fast to adjust. External MOLLE laser cut-outs allow pouch stacking.Features:Designed to hold a single Pistol MagazineMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLE for pouch stackingEasy and fast Magazine Retention adjustmentPlastic Retention Frame for tight magazine fitLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 10cmWidth: 4,5cmDepth: 2,5cm
    22,90 CHF

    In magazzino

  • Clawgear Small Horizontal Utility Pouch LC
    Small Horizontal Utility Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Small Horizontal Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting of various accessories.Features:Small Horizontal Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 10cmWidth: 14cmDepth: 5cm
    34,90 CHF

    In magazzino

  • Clawgear Medium Vertical Utility Pouch LC
    Medium Vertical Utility Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Vertical Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting of various accessories.Features:Medium Vertical Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 18cmWidth: 15cmDepth: 7cm
    34,90 CHF

    In magazzino

  • Clawgear Hydration Carrier Core 3L
    Hydration Carrier Core 3L
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Hydration Carrier Core 3L is an insulated hydration carrier pouch for up to 3L water bladders. External Webbing MOLLE allows mounting various pouches and accessories. On the inside is a loop which keeps the bladder in place, so it doesn’t slip down when getting empty.Features:Made of 500D NylonPouch is insulated to maintain the water temperatureInternal Velcro loop for keeping the bladder in placeMOLLE system compatibleFabrics:500D NylonNylon WebbingDimensions:Height: 36cmWidth: 20cmDepth: 2cm
    46,90 CHF

    In magazzino

  • Clawgear Small Vertical Utility Pouch Core
    Small Vertical Utility Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Small Vertical Utility Pouch Core is made to extend storage space. External webbing MOLLE allows mounting various accessories.Features:Small Vertical Utility PouchMade of 500D NylonInternal flat pocketMOLLE system compatibleFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 12cmWidth: 10cmDepth: 6cm
    23,90 CHF

    In magazzino

  • Clawgear 40mm Double Pouch Core
    40mm Double Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear 40mm Double Pouch is a classic 40mm grenade double pouch. The pouch is closed by a fastener and for additional security with a press buttons. Core line products design is focused on longevity and simplicity.Features:Designed to store two 40mm grenadesMade of 500D NylonMOLLE system compatibleReinforced closure/opening flapFabrics:500D NylonNylon WebbingDimensions:Height: 11cmWidth: 10cmDepth: 3cm
    25,90 CHF

    In magazzino

  • Clawgear Medium Vertical Utility Pouch Core
    Medium Vertical Utility Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Medium Vertical Utility Pouch Core is made to extend storage space. External webbing MOLLE allows mounting various accessories.Features:Medium Vertical Utility PouchMade of 500D NylonInternal flat pocketMOLLE system compatibleFabrics:500D NylonNylon WebbingYKK ZipperDimensions:Height: 18cmWidth: 15cmDepth: 7cm
    26,90 CHF

    In magazzino

  • Clawgear Backward Flap Pistol Mag Pouch
    Backward Flap Pistol Mag Pouch
    36,90 CHF

    In magazzino

  • Clawgear Hydration Carrier Core 2L
    Hydration Carrier Core 2L
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Hydration Carrier Core 2L is an insulated hydration carrier pouch for up to 2L water bladders. External Webbing MOLLE allows mounting various pouches and accessories. On the inside is a loop which keeps the bladder in place, so it doesn’t slip down when getting empty.Features:Made of 500D NylonPouch is insulated to maintain the water temperatureInternal Velcro loop for keeping the bladder in placeMOLLE system compatibleFabrics:500D NylonNylon WebbingDimensions:Height: 25cmWidth: 20cmDepth: 2cm
    39,90 CHF

    In magazzino

  • Clawgear IFAK Rip-Off Pouch Core
    IFAK Rip-Off Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear rip-off IFAK is designed to fit most necessary medicaments needed for personal first aid. The pouch is kept secure by two webbing straps connected by a buckle and a velcro on the back of the pouch. The IFAK can be easily detached by opening the buckle and ripping of the pouch. On the inside, there are multiple elastic webbing organizers and flat pockets for med storage. There are also elastic loops and a flat zipped pocket on the outside for additional medical accessories. The IFAK has a large pull handle for fast access when stored in e.g., cargo pockets.Features:Rip-off IFAK pouchMade of 500D NylonMultiple flat inner pockets and elastic webbing organizers for your medsMOLLE system compatibleExternal Safety strap providing secure attachmentExternal flat zipped pocketExternal elastic webbing loopsPouch is fast detachable and kept in place by velcroFabrics:500D NylonWoojin plastic partsNylon WebbingYKK ZipperDimensions:Height: 18cmWidth: 13cmDepth: 8cm
    54,90 CHF

    In magazzino

  • Clawgear 5.56mm Open Triple Mag Pouch Core
    5.56mm Open Triple Mag Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic triple Magazine Shingle with adjustable bungee cord pull tab retention. External MOLLE webbing for pouch stacking. Core line products design is focused on longevity and simplicity.Features:Designed for three 5.56 / AK MagazinesMade of 500D NylonMOLLE system compatibleAdjustable Magazine RetentionFabrics:500D NylonNylon WebbingDimensions:Height: 13cmWidth: 25cmDepth: 2cm
    34,90 CHF

    In magazzino

  • Clawgear Frag Grenade Pouch Core
    Frag Grenade Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Frag Grenade Pouch core is a classic FG pouch with a plastic buckle opening. The pouch has ambidextrous safety lever locking loops for improved safety.Features:Designed for standard sized frag grenadesMade of 500D NylonPlastic buckle opening/closureMOLLE system compatibleAmbidextrous safety lever locking loopsFabrics:500D NylonWoojin plastic buckleNylon WebbingDimensions:Height: 10cmWidth: 8cmDepth: 4cm
    18,90 CHF

    In magazzino

  • Clawgear 5.56mm Open Single Mag Pouch Core
    5.56mm Open Single Mag Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic single Magazine Shingle with adjustable bungee cord pull tab retention. External MOLLE webbing for pouch stacking. Core line products design is focused on longevity and simplicity.Features:Designed for a single 5.56 / AK MagazineMade of 500D NylonMOLLE system compatibleAdjustable Magazine RetentionFabrics:500D NylonNylon WebbingDimensions:Height: 13cmWidth: 8,5cmDepth: 2cm
    18,90 CHF

    In magazzino

  • Clawgear Smoke Grenade Pouch Core
    Smoke Grenade Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Smoke Grenade Pouch Core is designed to store common smoke grenades. The pouch has ambidextrous safety lever locking loops for improved safety and its closed with a plastic buckle.Features:Designed for standard sized smoke grenadesMade of 500D NylonPlastic buckle opening/closureMOLLE system compatibleAmbidextrous safety lever locking loopsFabrics:500D NylonWoojin plastic buckleNylon WebbingDimensions:Height: 13cmWidth: 8cmDepth: 5cm
    23,90 CHF

    In magazzino

  • Clawgear Small Radio Pouch LC
    Small Radio Pouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Small Radio pouch due to its elastic design will fit most small radios. The radio is securely kept in place by a fast detachable bungee retention.Designed to hold small radios like Baofeng and similar in sizeMade of bonded Laminate for extreme robustnessMOLLE system compatibleAdjustable RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimension:Height: 10cmWidth: 6,5cmDepth: 4cm
    26,90 CHF

    In magazzino

  • Clawgear 5.56 / AK Speedpouch LC
    5.56 / AK Speedpouch LC
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Clawgear 5.56/AK Speedpouch is a hybrid construction that utilizes a plastic retention frame to hold tight a single rifle magazine without the need of a classic bungee retention pull tab, providing the user with a fast mag draw. The pouch retention is easy and fast to adjust. External MOLLE laser cut-outs allow pouch stacking.Features:Designed to hold a single 5.56/AK MagazineMade of bonded Laminate for extreme robustnessMOLLE system compatibleExternal Laser cut MOLLE for pouch stackingEasy and fast Magazine Retention adjustmentPlastic Retention Frame for tight magazine fitLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 12cmWidth: 8cmDepth: 2,5cm
    27,90 CHF

    In magazzino

  • Clawgear Universal Rifle Mag Pouch
    Universal Rifle Mag Pouch
    Clawgear's nylon equipment is designed to increase the operator's performance and fightability. These products are optimized to be as versatile and lightweight as possible, the use of proprietary Tacticoat and Tacticoat Reinforced materials same time massively increases the durability and lifetime.The Universal Mag Pouch features rapid access to the magazine and is compatible with an extremely wide range of magazines in different calibers (5.56, 7.62x39, 5.45x39 etc).Designed and prototyped in Austria, field tested worldwide, assembled in Poland from EU and US made military grade materials.FeaturesTacticoat laser cutted constructionLow profile and lightweightMOLLE PALS compatibleWeighs just 72gCompatibilityNATO STANAG 4179AR-15/M4/M16 platform magazines including PMAGsAK 74 / AK 47 platformSIG 55x (without couplers)G36 (without couplers)Galil 5.56mmSteyr AUGTacticoat ReinforcedThis laminated material has been developed to provide an incredibly strong and easy to process fabric for the production of outstandingly durable gear for law enforcement and military use. Due to its layered construction it has unique strength to weight characteristics.
    30,90 CHF

    In magazzino

  • Clawgear 5.56mm Single Mag Stack Flap Pouch Core
    5.56mm Single Mag Stack Flap Pouch Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic closed Magazine Pouch designed for harsh environments to protect magazines from the elements. Suitable for green tactics. Pouch capacity can be adjusted by bungee cords to hold either one or two Magazines.Features:Designed to hold one or two 5.56 / AK MagazinesPouch depth adjustable by an Elastic cordMade of 500D NylonMOLLE system compatibleClosure/opening flapFabrics:500D NylonNylon WebbingDimensions:Height: 14cmWidth: 8cmDepth: 5,5cm
    24,90 CHF

    In magazzino

  • Clawgear Admin Chest Panel Core
    Admin Chest Panel Core
    Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Admin Chest Panel Core is a multifunctional administrative pouch designed for most plate carriers with MOLLE surfaces. It contains a flat fastener pocket, spatial pocket with a patch surface and an elastic webbing organizer for various accessories.Features:Admin PouchInner elastic webbing organizerMade of 500D NylonMOLLE system compatiblePatch SurfaceFabrics:500D NylonNylon WebbingDimensions:Height: 12,5cmWidth: 19cm
    21,90 CHF

    In magazzino

  • Clawgear 9mm Mag Pouch Flap LC
    9mm Mag Pouch Flap LC
    19,90 CHF

    In magazzino

  • Clawgear Backward Flap Rifle Mag Pouch
    Backward Flap Rifle Mag Pouch
    36,90 CHF

    In magazzino

  • Clawgear Backward SR Mag Pouch
    Backward SR Mag Pouch
    36,90 CHF

    In magazzino