Armi da fuoco e accessori

Armi da fuoco e accessori

Confronta subito fino a 3 prodotti
0 Articoli selezionati per il confronto
Selezionate fino a tre prodotti da confrontare facendo clic sull'icona accanto al prodotto corrispondente nell'elenco dei prodotti.
Selezionate fino a tre prodotti da confrontare facendo clic sull'icona accanto al prodotto corrispondente nell'elenco dei prodotti.
Selezionate fino a tre prodotti da confrontare facendo clic sull'icona accanto al prodotto corrispondente nell'elenco dei prodotti.
    Smistamento:
    Filtro
  • Clawgear AK47 Medium Slick Handguard M-LOK
    AK47 Medium Slick Handguard M-LOK
    • Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
    162,90 CHF

    In magazzino

  • Clawgear AK47 Short Slick Handguard M-LOK
    AK47 Short Slick Handguard M-LOK
    • Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
    139,90 CHF

    In magazzino

  • Clawgear AK47 Gas Tube Cover
    AK47 Gas Tube Cover
    The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
    109,90 CHF

    In magazzino

  • Clawgear SOF Compensator M15x1
    SOF Compensator M15x1
    Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.The SOF Compensator is a highly effective muzzle device designed to combine two Characteristics/Features. Reduce recoil and muzzle rise in a well-balanced mix.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the G3/G36 SOF Compensator with the crush washer to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: H&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
    89,90 CHF

    In magazzino

    Filettatura della canna: 15 mm CW
  • Clawgear Flip-Up Sight Set
    Flip-Up Sight Set
    Iron Sight Set consisting of Front and Rear sightFeatures:• Fit MIL-STD-1913 Picatinny / STANAG 4694 Rails• Low Profile-foldable when not in use• Hardened and non-reflective coating• Durable metal construction• Tool-free adjustable front elevation and rearwindage
    149,90 CHF

    In magazzino

  • Clawgear AK Blast Forward Compensator
    AK Blast Forward Compensator
    Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction, the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityAK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 Series, AKS-74U, Saiga riflesInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw the compensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.
    129,90 CHF

    In magazzino

    Filettatura della canna: 14 mm CCW
  • Clawgear AUG A3 Top Rail
    AUG A3 Top Rail
    Made of high strength aluminum with Mil-Spec Type III hard coat anodized finishFeatures a non-glare coating to reduce reflectionsMakes the A3 rifle compatible with the Clawgear AUG HandguardFeatures a 30 slot picatinny rail (NATO STANAG 4694)Anti-rotational QD attachment point at the front
    184,90 CHF

    In magazzino

  • Clawgear Picatinny QD Mount
    Picatinny QD Mount
    44,90 CHF

    In magazzino

  • Clawgear Keymod 9 Slot Rail
    Keymod 9 Slot Rail
    33,90 CHF

    In magazzino

  • Clawgear Blast Forward Compensator M15x1
    Blast Forward Compensator M15x1
    Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.
    129,90 CHF

    In magazzino

    Filettatura della canna: 15 mm CW
  • Clawgear AR15 Starblast Compensator
    AR15 Starblast Compensator
    The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T).Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15,Steyr STM556 etc. Does not fit Oberland Arms OA-15
    129,90 CHF

    In magazzino

  • Clawgear Flip-Up Rear Sight
    Flip-Up Rear Sight
    Flip Up Rear Iron SightFeatures:• Fit MIL-STD-1913 Picatinny / STANAG 4694 Rails• Low Profile-foldable when not in use• Hardened and non-reflective Coating• Durable metal construction• Tool-free adjustable windage
    76,90 CHF

    In magazzino

  • Clawgear AR-10 Blast Forward Compensator
    AR-10 Blast Forward Compensator
    Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the AR-10 US Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityAll AR-10 in .308 or 7.62x51 mm caliber with a barrel thread of 5/8 x 24 TPI UNEF, for example: DPMS LR .308, DPMS G2, DD-AR .308, Bushmaster AR-10, S&WM&P10, etc... Does not fit Oberland Arms OA-10InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.
    129,90 CHF

    In magazzino

    Filettatura della canna: 5/8x24 TPI UNEF
  • Clawgear Flip-Up Front Sight
    Flip-Up Front Sight
    Flip Up Front Iron SightFeatures:• Fit MIL-STD-1913 Picatinny / STANAG 4694 Rails• Low Profile-foldable when not in use• Hardened and non-reflective Coating• Durable metal construction• Tool-free adjustable elevation
    83,90 CHF

    In magazzino

  • Clawgear OA-15 Blast Forward Compensator
    OA-15 Blast Forward Compensator
    Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityOberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear Logo faces upwards.
    129,90 CHF

    In magazzino

    Filettatura della canna: 14 mm CW
  • Clawgear AUG MSM 10 Slot Rail
    AUG MSM 10 Slot Rail
    Clawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 10 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)
    29,90 CHF

    In magazzino

  • Clawgear Keymod 3 Slot Rail
    Keymod 3 Slot Rail
    21,90 CHF

    In magazzino

  • Clawgear 5.56 Extended Magazine Base
    5.56 Extended Magazine Base
    The CLAWGEAR® Magazine Base Extension fits on the Magpul5.56 PMag 10 AR/M4 3rd Generation Magazine. When installed,the capacity will not be increased,only the overall dimension of a 30 Round Magazine will be represented. Mag changes, gripping, and overall handling will be enhanced.Produced from high-quality polymer and Made in Austria.
    29,90 CHF

    In magazzino

  • Clawgear Snap Cap .223 Rem 2-pack
    Snap Cap .223 Rem 2-pack
    13,90 CHF

    In magazzino

  • Clawgear Snap Cap .308 Win 2-pack
    Snap Cap .308 Win 2-pack
    15,90 CHF

    In magazzino

  • Clawgear AUG Blast Forward Compensator
    AUG Blast Forward Compensator
    Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the AUG SOF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySteyr AUG A1/A2, AUG A3, AUG A3 SF, AUG P, AUG Z with thread, AUG Z A3 with thread, AUG LMG variants, AUG SA variants, F88 Austeyr, Thales EF88 / F90, MSAR STG-556InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the counter nut counterclockwise on the barrel until it stops. Screw the compensator counterclockwise on the barrel so it touches the counternut - then turn it back until the Claw Gear logo faces upwards. Tighten the counternut towards the compensator by hand and use a 19 mm wrench or the included tool to secure the position.
    149,90 CHF

    In magazzino

    Filettatura della canna: 13 mm CCW
  • Clawgear SG553 Blast Forward Compensator
    SG553 Blast Forward Compensator
    Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySwissArms SG553 with threaded barrelInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.Thread: M14x1 left
    129,90 CHF

    In magazzino

    Filettatura della canna: 14 mm CCW
  • Clawgear Keymod 7 Slot Rail
    Keymod 7 Slot Rail
    29,90 CHF

    In magazzino

  • Clawgear Snap Cap 7,62x39 2-pack
    Snap Cap 7,62x39 2-pack
    15,90 CHF

    In magazzino

  • Clawgear PMAG AUG Legalizer minus 20rds 3-Pack
    PMAG AUG Legalizer minus 20rds 3-Pack
    The PMAG® AUG Legalizer is intended to be installed into 30 round Magpul® PMAG® 30 AUS® Gen M3 to reduce the capacity down to 10 rounds. Installation of this high-quality product made from glass fiber reinforced polymer is simple and does not require any tools. No permanent modification of the magazine is necessary.NOTE: The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity. Make sure to check all laws and regulations in your country to determine the legality of your magazines.Magpul® and PMAG® are registered trademarks owned by Magpul Industries Corp. Neither Clawgear, nor TMH Trading GmbH are affiliated in any manner with or otherwise endorsed by, Magpul Industries Corp. For genuine Magpul products and parts visit www.magpul.com.
    15,90 CHF

    In magazzino

  • Clawgear AK47 Long Slick Handguard M-LOK
    AK47 Long Slick Handguard M-LOK
    • Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
    179,90 CHF

    In magazzino

  • Clawgear AK Rear Sight Mount
    AK Rear Sight Mount
    Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.Adjustment ScrewsAdjust the angle of the mount to align it with the point of bullet impact.Shaped ContourThe design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.Emergency SightEven with an optical device mounted the sight can be used as a backup.Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight. Not compatible with SKS rifles.Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM
    94,90 CHF

    In magazzino

  • Clawgear AR-15 Slim Handguard 10 Inch M-LOK
    AR-15 Slim Handguard 10 Inch M-LOK
    209,90 CHF

    In magazzino

  • Clawgear SG550 High Profile Mount Base
    SG550 High Profile Mount Base
    Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.AIMING BOREMakes the use of the original diopter sights possible.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the ri_x001E_ e with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
    144,90 CHF

    In magazzino

  • Clawgear 45 Degrees Mount Keymod
    45 Degrees Mount Keymod
    RAIL KEYMOD INCLINÉ À 45 DEGRÉS
    44,90 CHF

    In magazzino

  • Clawgear SG550 Low Profile Mount Base
    SG550 Low Profile Mount Base
    Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the rifle with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
    99,90 CHF

    In magazzino

  • Clawgear AUG Modular Scope Mount
    AUG Modular Scope Mount
    Clawgear‘s modular mounting system products are designed to increase weapon performance and accuracy. Due to its glass fibre reinforced polymer construction, this rugged and high quality item will serve you in any combat situation. The Modular Scope Mount protects the original optics of AUG rifles and provides mounting possibilites for various Picatinny based accessories.NATO STANAG 4694 RailThe integrated 16 slot Picatinny Rail allows the user to upgrade his AUG rifle with various aiming devices or accessories.Lightweight ConstructionAlthough this mount base has been designed in a lightweight way, its mechanical strength is enhanced by the use of glass fiber reinforced polymer.Mounting PossibilitesAdditional side rails (sold seperately) can be attached to both sides of the AUG MSM to provide additional mounting spots for further equipment.Reduced Infrared SignatureThis accessory part features reduced infrared singature.Flip-Up CoversTwo flip-up covers (included) protect the lenses of the scope from rain, dust, debris and mud.InstallationMake sure your weapon is unloaded and safe. Take the left half-shell (the one without top rail) and place it on the scope by pushing it over the diagonal fixing screw of the scope. Then push the right half-shell into the corresponding slots on the left part until it clicks in. Make sure that all engagement hooks are snapped in. Place each hexagon nut in the clearance of the right shell and tighten the corresponding screw from the left shell side. Mount the included flip-up covers to protect the original scope glass.CompatibilitySteyr AUG A1/A2, AUG P, AUG Z, AUG LMG variants, AUG SA variants, F88 Austeyr. Applies to all variants with 1,5x standard Steyr scope.
    149,90 CHF

    In magazzino

  • Clawgear AUG MSM 4 Slot Rail
    AUG MSM 4 Slot Rail
    Clawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 4 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)
    19,90 CHF

    In magazzino

  • Clawgear AKSU SOF Compensator
    AKSU SOF Compensator
    Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.The SOF Compensator is a highly effective muzzle device designed to combine two Characteristics/Features. Reduce recoil and muzzle rise in a well-balanced mix.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Mounting NotchesSix mounting grooves allow the compensator to fit on any AKSU based weapon system.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Compatibility: AKS-74U, Krinkov AKSU and all variants based on these models with 24x1,5 muzzle threadInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw the compensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.
    109,90 CHF

    In magazzino

    Filettatura della canna: M24x1,5 CW
  • Clawgear AR-15 Slim Handguard 10 Inch Keymod
    AR-15 Slim Handguard 10 Inch Keymod
    209,90 CHF

    In magazzino

  • Clawgear Snap Cap .45 ACP 5-pack
    Snap Cap .45 ACP 5-pack
    19,90 CHF

    In magazzino

  • Clawgear AUG Starblast Compensator
    AUG Starblast Compensator
    The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T). The special design on the AUG variant does not rely on the classic counter nut and utilizes the full length of the muzzle treading, This makes it ideal for use with a suppressor.
    129,90 CHF

    In magazzino

  • Clawgear AK-47 Starblast Compensator
    AK-47 Starblast Compensator
    The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T).Mounting grooves allow the compensator be timed on any AK based weapon system.Fits AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 Series, AKS-74U, Saiga rifles.
    129,90 CHF

    In magazzino

  • Clawgear OA-15 SOF Compensator
    OA-15 SOF Compensator
    Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 SOF Compensator with the crush washer (enclosed) to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: Oberland Arms OA-15 modelsInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.
    89,90 CHF

    In magazzino

    Filettatura della canna: 14 mm CW
  • Clawgear M-LOK 3 Slot Rail
    M-LOK 3 Slot Rail
    Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 3 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
    22,90 CHF

    In magazzino

  • Clawgear M-LOK T-Nut Replacement Set
    M-LOK T-Nut Replacement Set
    Spare mounting hardware for all kind of M-LOK accessories.Feature List:• T Nuts made of stainless steel to avoid corrosion.No coating that can wear off or chip away whenmounted and dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
    7,90 CHF

    In magazzino

  • Clawgear AK-AKM Pistol Grip
    AK-AKM Pistol Grip
    29,90 CHF

    In magazzino