Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilitySwissArms SG553 with threaded barrelInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.Thread: M14x1 left

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 Blast Forward Compensator with the crush washer to ensure the correct alignment on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityOberland Arms OA-15InstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear Logo faces upwards.

Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any situation.Breacher SpikesThese sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.Expansion ChamberThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Crush WasherMount the OA-15 SOF Compensator with the crush washer (enclosed) to ensure the correct alignment on the barrel.Closed BottomPrevents blown up dust and debris.Compatibility: Oberland Arms OA-15 modelsInstallation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench to tighten the compensator until the Claw Gear logo faces upwards.

The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T).Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15,Steyr STM556 etc. Does not fit Oberland Arms OA-15

The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T).Mounting grooves allow the compensator be timed on any AK based weapon system.Fits AK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 Series, AKS-74U, Saiga rifles.

The Raider Mk.IV mission pant has been designed to be simple and lightweight assault pants, featuring extremely useful extras and greatest possible comfort for today's war fighters. It features an improved waist adjustment system with elastic components for better comfort and absorption of body movements. The pocket concept has been optimized; cargo pockets have been extended with an an additional compartment which is accessible from outside and holds a 30rds magazine for rapid access. Profound modifications apply to the knee area which is now equipped with a handy inward knee height adjustment. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the the button holes which have been integrated for this reason into the pant conception.The Raider Mk.IV Pant's durability and body fit makes this it suitable for all battlefield missions and every day carry as well. The belt area is optimized for rigger & safety belts as well as for suspenders. Front Pockets allow fast and easy access also with gloves. Cargo Pockets provide a lot of space for your equipment and also include an extra zip-pocket. The inside knee area is equipped with a special fabric to provide optimum sweat absorption. 'YKK' zippers and 'Amann' sewing threads have been processed, all main seams are triple stitched for extra durability.Outstanding wearing comfort and anatomic fitOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signature

CIM (Combat Insulation Medium) has been designed as a very durable outer shell for extended operations in extreme cold and wet environments. The reduced infrared signature (NIR) makes this jacket applicable for special operations use. Material selection was focused on rugged, light weight performance materials with little pack size. The Pattern has been constructed for high mobility and to harmonise with body contours.Durable nylon woven fabric with rip stop structure features durable water repellent (DWR) coating and a wind blocking membrane with high waterproofness and breathability for optimal moisture management. Seal taped seams prevent intrusion of water and guarantee best possible protection during operations in demanding environments.Climashield Apex is a very well performing insulation material with excellent thermal efficiency and has been well tested and used for military tasks. This feather light material has a high resistance to tearing, good moisture transfer qualities and can still be packed in a tiny space. The combination of 133g for body and 100g for sleeves achieved best results during development and field testing. The inner lining comes with the same featherlight and comfortable nylon fabric as we have already chosen for CIL jacket.Neck and hood area are equipped with comfortable and warming fleece, the hood is fully adjustable and helmet compatible. All on the outer shell located zips are waterproof, both sleeves feature a sleeve pocket and hook & loop mounting surface. Large front pockets allow easy access even when wearing chest rigs or backpacks. The CIM also features pit zippers for easy venting and temperature regulation.Durable nylon woven fabric with reduced infrared signature (NIR) and durable water repellent coatingWaterproof membrane (10'000mm hydrostatic head) with excellent breathability (MVP 10'000g/m2/d)Seal taped seams for best possible weather protectionClimashield Apex insulation for excellent thermal efficiencePocket and hook & loop patches on both sleevesFully adjustable helmet compatible hoodModern cut for great ease of movementElastic cuffs on sleevesRoomy two way front pockets with good accessibilityPit zippers for easy ventingTwo-way front zipWaterproof zippers on outer shell

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.