Sling Swivel 1.25 Inch Stainless Steel

Sling Swivel 1.25 Inch Stainless Steel

Numero di articolo: 11155506000
Colore: Nero

In stock

Caricamento...
Trova un rivenditore locale
Determinare la posizione Localizzatore di negozi aperti
Rivenditori vicini:
Non è stato possibile trovare alcun rivenditore nel raggio di 50 km.
Inserire l'indirizzo:

Descrizione

Clawgear Quick Detach Sling SwivelCompatibel with all common QD Sling mountsFits Slings with 1.25 Inch webbingBody and Plunger made from... Mostra di più

Dimensioni e peso

Lunghezza:
4 cm
Lunghezza imballata:
11.9 cm
Ampio:
1.4 cm
Larghezza confezionata:
5.1 cm
Altezza:
2.6 cm
Altezza imballata:
5.5 cm
Peso:
0.03 kg
Peso dell'imballo:
0.03 kg

Recensioni

0 da 0 Recensioni

Dateci una valutazione!

Condividete la vostra esperienza con altri clienti.

Prodotti interessanti

Prodotti interessanti

Clawgear Rear End Kit Snap Hook
Rear End Kit Snap Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Rear End Kit Snap Hook is designed for Clawgear slings or other utilizing a 25mm webbing loop. This rear end kit has a steel snap hook for attaching to various sling swivels or loops. The Snap Hook is covered with an elastic webbing collar to prevent weapon from scratching.Features:Designed for Clawgear 2-point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of bonded Laminate for extreme robustnessSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingFabrics:500D Nylon bonded with NBR fabricITW Nexus 30mm plastic loopSteel Snap HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Loop
Front End Kit Loop
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Loop is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has an adjustable 25mm webbing loop for attaching various sling swivels or hooks.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbingMounting Loop size adjustablePlastic buckle attachmentFabrics:32mm Nylon WebbingITW Nexus 25mm female buckleDimensions:Length: 10cm+ (adjustable)Width: 3cm
10,90 CHF

In magazzino

Clawgear Rear End Kit Mash Hook
Rear End Kit Mash Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Rear End Kit Mash Hook is designed for Clawgear slings or other utilizing a 25mm webbing loop. This rear end kit has a steel Mash Hook for attaching to various sling swivels or loops.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of bonded Laminate for extreme robustnessMash Hook covered with an elastic webbing collar to prevent weapon from scratchingFabrics:500D Nylon bonded with NBR fabricITW Nexus 30mm plastic loopSteel Mash HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Mash Hook
Front End Kit Mash Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Mash Hook is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fix Mash Hook, covered with an elastic webbing collar to prevent weapon from scratching.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of 500D Nylon and bonded Laminate for extreme robustnessMash Hook covered with an elastic webbing collar to prevent weapon from scratchingPlastic buckle attachmentFabrics:500D Nylon bonded with NBR fabricITW Nexus 25mm female buckleStainless Steel Mash HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Snap Hook
Front End Kit Snap Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Snap Hook is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed Snap Hook.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of 500D Nylon and bonded Laminate for extreme robustnessSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingPlastic buckle attachmentFabrics:500D Nylon bonded with NBR fabricITW Nexus 25mm female buckleSteel Snap HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Paracord
Front End Kit Paracord
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Paracord is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed military grade paracord loop for direct attachment.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbing in conjunction with military grade ParacordPlastic buckle attachmentFabrics:Nylon WebbingITW Nexus 30mm plastic loopType III 550 ParacordDimensions:Length: 24cmWidth: 3cm
10,90 CHF

In magazzino

I clienti hanno acquistato anche

I clienti hanno acquistato anche

Vendita
Clawgear CIM Jacket
CIM Jacket
CIM (Combat Insulation Medium) has been designed as a very durable outer shell for extended operations in extreme cold and wet environments. The reduced infrared signature (NIR) makes this jacket applicable for special operations use. Material selection was focused on rugged, light weight performance materials with little pack size. The Pattern has been constructed for high mobility and to harmonise with body contours.Durable nylon woven fabric with rip stop structure features durable water repellent (DWR) coating and a wind blocking membrane with high waterproofness and breathability for optimal moisture management. Seal taped seams prevent intrusion of water and guarantee best possible protection during operations in demanding environments.Climashield Apex is a very well performing insulation material with excellent thermal efficiency and has been well tested and used for military tasks. This feather light material has a high resistance to tearing, good moisture transfer qualities and can still be packed in a tiny space. The combination of 133g for body and 100g for sleeves achieved best results during development and field testing. The inner lining comes with the same featherlight and comfortable nylon fabric as we have already chosen for CIL jacket.Neck and hood area are equipped with comfortable and warming fleece, the hood is fully adjustable and helmet compatible. All on the outer shell located zips are waterproof, both sleeves feature a sleeve pocket and hook & loop mounting surface. Large front pockets allow easy access even when wearing chest rigs or backpacks. The CIM also features pit zippers for easy venting and temperature regulation.Durable nylon woven fabric with reduced infrared signature (NIR) and durable water repellent coatingWaterproof membrane (10'000mm hydrostatic head) with excellent breathability (MVP 10'000g/m2/d)Seal taped seams for best possible weather protectionClimashield Apex insulation for excellent thermal efficiencePocket and hook & loop patches on both sleevesFully adjustable helmet compatible hoodModern cut for great ease of movementElastic cuffs on sleevesRoomy two way front pockets with good accessibilityPit zippers for easy ventingTwo-way front zipWaterproof zippers on outer shell
219,90 CHF 349,90 CHF

In magazzino

Clawgear 6 Inch Light Stick
6 Inch Light Stick
The 6" lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.
2,90 CHF - 4,90 CHF

In magazzino

Clawgear Mk.II Instructor Shirt
Mk.II Instructor Shirt
The Instructor Shirt has been developed for use at shooting ranges and training facilities. We designed this unique shirt to fulfil requirements of comfort and utilitarian configuration. The Instructor Shirt is exceptionally versatile in its capacities. It features velcro mounting points and zip pockets on both sleeves. A hidden side pocket for mobile phone including cable outlet has also been included.
54,90 CHF

Maggioranza in magazzino

Clawgear Raider Mk.IV Pant
Raider Mk.IV Pant
The Raider Mk.IV mission pant has been designed to be simple and lightweight assault pants, featuring extremely useful extras and greatest possible comfort for today's war fighters. It features an improved waist adjustment system with elastic components for better comfort and absorption of body movements. The pocket concept has been optimized; cargo pockets have been extended with an an additional compartment which is accessible from outside and holds a 30rds magazine for rapid access. Profound modifications apply to the knee area which is now equipped with a handy inward knee height adjustment. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the the button holes which have been integrated for this reason into the pant conception.The Raider Mk.IV Pant's durability and body fit makes this it suitable for all battlefield missions and every day carry as well. The belt area is optimized for rigger & safety belts as well as for suspenders. Front Pockets allow fast and easy access also with gloves. Cargo Pockets provide a lot of space for your equipment and also include an extra zip-pocket. The inside knee area is equipped with a special fabric to provide optimum sweat absorption. 'YKK' zippers and 'Amann' sewing threads have been processed, all main seams are triple stitched for extra durability.Outstanding wearing comfort and anatomic fitOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signature
164,90 CHF - 209,90 CHF

In magazzino

Vendita
Field Short
The Field Short has especially been drafted for the use under hot climate conditions and closes the gap between comfort and functional capabilty in this area. It features the proven waist adjustment system with elastic components for better comfort and absorption of body movements. The integrated main thigh pockets offer sufficient room and provide a seperate compartment for the user's smartphone – everything is accessible even when wearing gloves. A small pocket on outside of the thigh is construed to stow a knife or a pistol mag.The Field Short comes with some more features: The belt area is optimized for rigger & safety belts as well as for suspenders and is comfortable due to the use of soft materials. On the inner backside is a hidden pocket which can be used for documents, e.g. a passport. Despite its comfortable fit, the pants robustness and reduced nIR signature (not valid for MultiCam Polycotton) are outstanding. 'YKK' zippers and high-grade sewing threads have been processed. All main seams are triple stitched for extra durability, many heavily used spots are furthermore reinforced with bartack stitches.Excellent wearing comfort, perfect fit and ease of movementOptimized for safety & rigger belts useTriple stitched main seams, reinforced areas via bartack stitchesReduced infrared signature and robust materials
44,90 CHF - 69,90 CHF 89,90 CHF - 137,90 CHF

In magazzino

Clawgear Breacher Hood
Breacher Hood
Specifically designed to extend the MK.III Combat Shirt. The Breacher Hood has wired brim and elasticated toggle adjustments. It attaches quickly and easily using velcro. Prevents debris, dirt and weather from irritating your neck.
21,90 CHF - 32,90 CHF

In magazzino