Rear End Kit Paracord

Rear End Kit Paracord

Numero di articolo: 10668033200
Colore: RAL7013

Attualmente non disponibile

Questo articolo non è al momento disponibile.

Purtroppo non conosciamo la data di consegna, ma sarà pubblicata qui non appena sarà confermata. Desidera essere informato via e-mail non appena questo prodotto sarà nuovamente disponibile? Se desiderate essere informati sulla variazione del livello delle scorte, utilizzate il modulo sottostante:

Caricamento...
Trova un rivenditore locale
Determinare la posizione Localizzatore di negozi aperti
Rivenditori vicini:
Non è stato possibile trovare alcun rivenditore nel raggio di 50 km.
Inserire l'indirizzo:

Descrizione

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightw... Mostra di più

Dimensioni e peso

Lunghezza:
8.5 cm
Lunghezza imballata:
19 cm
Ampio:
3.5 cm
Larghezza confezionata:
13 cm
Altezza:
1.8 cm
Altezza imballata:
1.8 cm
Peso:
0.014 kg
Peso dell'imballo:
0.028 kg

Recensioni

0 da 0 Recensioni

Dateci una valutazione!

Condividete la vostra esperienza con altri clienti.

Prodotti interessanti

Prodotti interessanti

Clawgear Rear End Kit Snap Hook
Rear End Kit Snap Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Rear End Kit Snap Hook is designed for Clawgear slings or other utilizing a 25mm webbing loop. This rear end kit has a steel snap hook for attaching to various sling swivels or loops. The Snap Hook is covered with an elastic webbing collar to prevent weapon from scratching.Features:Designed for Clawgear 2-point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of bonded Laminate for extreme robustnessSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingFabrics:500D Nylon bonded with NBR fabricITW Nexus 30mm plastic loopSteel Snap HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Loop
Front End Kit Loop
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Loop is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has an adjustable 25mm webbing loop for attaching various sling swivels or hooks.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbingMounting Loop size adjustablePlastic buckle attachmentFabrics:32mm Nylon WebbingITW Nexus 25mm female buckleDimensions:Length: 10cm+ (adjustable)Width: 3cm
10,90 CHF

In magazzino

Clawgear Rear End Kit Mash Hook
Rear End Kit Mash Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Rear End Kit Mash Hook is designed for Clawgear slings or other utilizing a 25mm webbing loop. This rear end kit has a steel Mash Hook for attaching to various sling swivels or loops.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of bonded Laminate for extreme robustnessMash Hook covered with an elastic webbing collar to prevent weapon from scratchingFabrics:500D Nylon bonded with NBR fabricITW Nexus 30mm plastic loopSteel Mash HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Mash Hook
Front End Kit Mash Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Mash Hook is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fix Mash Hook, covered with an elastic webbing collar to prevent weapon from scratching.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of 500D Nylon and bonded Laminate for extreme robustnessMash Hook covered with an elastic webbing collar to prevent weapon from scratchingPlastic buckle attachmentFabrics:500D Nylon bonded with NBR fabricITW Nexus 25mm female buckleStainless Steel Mash HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Snap Hook
Front End Kit Snap Hook
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Snap Hook is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed Snap Hook.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of 500D Nylon and bonded Laminate for extreme robustnessSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingPlastic buckle attachmentFabrics:500D Nylon bonded with NBR fabricITW Nexus 25mm female buckleSteel Snap HookDimensions:Length: 11cmWidth: 3cm
14,90 CHF

In magazzino

Clawgear Front End Kit Paracord
Front End Kit Paracord
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Paracord is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed military grade paracord loop for direct attachment.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbing in conjunction with military grade ParacordPlastic buckle attachmentFabrics:Nylon WebbingITW Nexus 30mm plastic loopType III 550 ParacordDimensions:Length: 24cmWidth: 3cm
10,90 CHF

In magazzino

I clienti hanno acquistato anche

I clienti hanno acquistato anche

Clawgear Front End Kit Paracord
Front End Kit Paracord
Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Front-End Kit Paracord is designed for Clawgear slings or other utilizing a similar 25mm plastic buckle mounting option. This front-end kit has a fixed military grade paracord loop for direct attachment.Features:Designed for Clawgear 2 -point Sling and Clawgear Sniper Rifle Sling or similar slingsMade of Nylon webbing in conjunction with military grade ParacordPlastic buckle attachmentFabrics:Nylon WebbingITW Nexus 30mm plastic loopType III 550 ParacordDimensions:Length: 24cmWidth: 3cm
10,90 CHF

In magazzino

Clawgear SG550 High Profile Mount Base
SG550 High Profile Mount Base
Clawgear‘s modular mounting system products are designed to increase weapon performance and handling. Due to it‘s construction in 6082 Aluminum, this rugged and high quality item will serve you in any combat situation.NATO STANAG 4694 RAILThe 13 slot Picatinny Rail allows the user to upgrade his 55X rifle with various aiming devices or accessories.LIGHTWEIGHT CONSTRUCTIONAlthough this mount base has been designed in a lightweight way, its mechanical strength is not being affected.ADJUSTMENT SCREWIt clamps the mount for a solid fit between both attachment points on the receiver and is secured by a clamp screw on the left side.DOVETAIL SLOTThe front attachment point is the dovetail on the receiver which is normally used to fix the brass catcher.AIMING BOREMakes the use of the original diopter sights possible.CompatibilitySIG550, SIG551, SIG552, SIG553, PE90 and all variants of the ri_x001E_ e with standard adjustable diopter sights.InstallationMake sure your weapon is unloaded and safe. Screw the included adjustment screw fully into the mount base. Put the rail on the upper receiver and slide it forward so the dovetail on the receiver connects smoothly to the front of the rail. Then use a 8mm wrench to unscrew the adjustment screw until it moves inside the hole of the rear sight base. Tighten it up for a solid fit. Use the clamp screw on the left side of the mount base to secure its position.
144,90 CHF

In magazzino