Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The QA Two Point Sling Paracord is a classic length adjustable two-point sling. Both sling ends have a fixed military grade paracord loop for direct attachment.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentFixed military grade paracord loops for direct attachmentDifferent mounting options can be added at each sling endStiff Nylon WebbingCompatible with all Clawgear Front/Rear End KitsFabrics:32mm Polyamide WebbingType III 550 ParacordACW and ITW Nexus plastic parts

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The One Point T-End Sling Snap Hook is a one-point sling, which is suited for direct MOLLE mounting. The sling end has a Snap Hook which is covered with an elastic webbing collar to prevent weapon from scratching.Features:Fully adjustable one-point SlingSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingDifferent mounting options can be added at each sling endStiff Nylon Webbing with stretchable sectionCompatible with all Clawgear Front End KitsFabrics:25mm Nylon WebbingSteel Snap HookACW and ITW Nexus plastic parts

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Sniper Rifle Sling Padded Snap Hook is a classic length adjustable two-point sling. Both sling ends have a steel Snap Hook. The center section of the sling has thick padding which is suitable for heavier weapons providing the user with more comfort during long wear.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentSnap Hook at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingCenter Section heavily Padded for improved comfortCompatible with all Clawgear Front/End KitsFabrics:32mm WebbingACW and ITW Nexus plastic partsNylon Webbing500D NylonSteel Snap Hook

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The QA Two Point Sling Loop is a classic length adjustable two-point sling. Both sling ends have an adjustable 25mm webbing loop for attaching various sling swivels or hooks.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentAdjustable Webbing loops at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingCompatible with all Clawgear Front/Rear End KitsFabrics:32mm Polyamide WebbingACW and ITW Nexus plastic parts

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Sniper Rifle Sling Padded QD Swivel is a classic length adjustable two-point sling. Both sling ends have a steel QD swivel. The center section of the sling has thick padding which is suitable for heavier weapons providing the user with more comfort during long wear.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentQD Swivel at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingQD Swivel covered with an elastic webbing collar to prevent weapon from scratchingCenter Section heavily Padded for improved comfortCompatible with all Clawgear Front/End KitsFabrics:32mm WebbingACW and ITW Nexus plastic partsNylon Webbing500D NylonSteel QD Swivel

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The QA Two Point Sling Padded loop is a classic length adjustable two-point sling. Both sling ends have an adjustable 25mm webbing loop for attaching various sling swivels or hooks. The center section of the sling is padded for increased comfort.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentAdjustable Webbing loops at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingCenter Section Padded for improved comfortCompatible with all Clawgear Front/Rear End KitsFabrics:32mm Polyamide WebbingACW and ITW Nexus plastic parts

The 6" lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.

The Instructor Shirt has been developed for use at shooting ranges and training facilities. We designed this unique shirt to fulfil requirements of comfort and utilitarian configuration. The Instructor Shirt is exceptionally versatile in its capacities. It features velcro mounting points and zip pockets on both sleeves. A hidden side pocket for mobile phone including cable outlet has also been included.

CIM (Combat Insulation Medium) has been designed as a very durable outer shell for extended operations in extreme cold and wet environments. The reduced infrared signature (NIR) makes this jacket applicable for special operations use. Material selection was focused on rugged, light weight performance materials with little pack size. The Pattern has been constructed for high mobility and to harmonise with body contours.Durable nylon woven fabric with rip stop structure features durable water repellent (DWR) coating and a wind blocking membrane with high waterproofness and breathability for optimal moisture management. Seal taped seams prevent intrusion of water and guarantee best possible protection during operations in demanding environments.Climashield Apex is a very well performing insulation material with excellent thermal efficiency and has been well tested and used for military tasks. This feather light material has a high resistance to tearing, good moisture transfer qualities and can still be packed in a tiny space. The combination of 133g for body and 100g for sleeves achieved best results during development and field testing. The inner lining comes with the same featherlight and comfortable nylon fabric as we have already chosen for CIL jacket.Neck and hood area are equipped with comfortable and warming fleece, the hood is fully adjustable and helmet compatible. All on the outer shell located zips are waterproof, both sleeves feature a sleeve pocket and hook & loop mounting surface. Large front pockets allow easy access even when wearing chest rigs or backpacks. The CIM also features pit zippers for easy venting and temperature regulation.Durable nylon woven fabric with reduced infrared signature (NIR) and durable water repellent coatingWaterproof membrane (10'000mm hydrostatic head) with excellent breathability (MVP 10'000g/m2/d)Seal taped seams for best possible weather protectionClimashield Apex insulation for excellent thermal efficiencePocket and hook & loop patches on both sleevesFully adjustable helmet compatible hoodModern cut for great ease of movementElastic cuffs on sleevesRoomy two way front pockets with good accessibilityPit zippers for easy ventingTwo-way front zipWaterproof zippers on outer shell

The Raider Mk.IV mission pant has been designed to be simple and lightweight assault pants, featuring extremely useful extras and greatest possible comfort for today's war fighters. It features an improved waist adjustment system with elastic components for better comfort and absorption of body movements. The pocket concept has been optimized; cargo pockets have been extended with an an additional compartment which is accessible from outside and holds a 30rds magazine for rapid access. Profound modifications apply to the knee area which is now equipped with a handy inward knee height adjustment. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the the button holes which have been integrated for this reason into the pant conception.The Raider Mk.IV Pant's durability and body fit makes this it suitable for all battlefield missions and every day carry as well. The belt area is optimized for rigger & safety belts as well as for suspenders. Front Pockets allow fast and easy access also with gloves. Cargo Pockets provide a lot of space for your equipment and also include an extra zip-pocket. The inside knee area is equipped with a special fabric to provide optimum sweat absorption. 'YKK' zippers and 'Amann' sewing threads have been processed, all main seams are triple stitched for extra durability.Outstanding wearing comfort and anatomic fitOptimized for safety & rigger belts useAdjustable knee-heightIntegrated knee pad compartments (knee pads are available optionally)Triple stitched main seamsReduced infrared signature

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.