Handguards
Compare jusqu'à 3 produits maintenant
0 Articles sélectionnés pour la comparaison
AK47 Medium Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish162,90 CHFEn stock
AK47 Short Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish139,90 CHFEn stock
AUG M-LOK Handguard
Clawgear apporte enfin un garde-main à profil bas polyvalent et léger au Steyr AUG, tout en incluant la plate-forme M-LOK et Keymod. Une conception sophistiquée et entièrement testée sur le terrain pour une capacité de combat sans compromis et une facilité d'utilisation. Construction monobloc solide, en aluminium à revêtement dur (Mil-8625-F type III, classe II) pour une combinaison parfaite de légèreté et de stabilité mécanique maximale. Le garde-main AUG M-LOK HANDGUARD est doté de douze fentes de montage pour une polyvalence sans limite et n'interfère pas avec la plupart des silencieux et des dispositifs de bouche. 100% ingénierie, testé sur le terrain et fabriqué en Autriche.Compatibilité :Steyr AUG A1 / A2, AUG A3 SF, AUG P, AUG Z, variantes d’AUG LMG, AUG SA variantes, F88 Austeyr, Thales EF88, MSAR STG-556.Non compatible avec AUG A3, AUG Z A3, variantes d’AUG 9mm.269,90 CHFEn stock
M-LOK 7 Slot Rail
Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 7 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.29,90 CHFEn stock
AK47 Long Slick Handguard M-LOK
• Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish179,90 CHFEn stock
M-LOK 3 Slot Rail
Rail M-LOK à 3 fentes. Système de montage OTAN STANAG 4694 à utiliser avec toutes les plates-formes compatibles M-LOK. Fabriqué en aluminium anodisé (Mil-8625-F type III, classe II).Les bords chanfreinés empêchent l'accrochage sur les obstacles. Les extrémités sont spécialement conçues pour permettre l'alignement de plus extrémités de rails dans une rangée.Veuillez noter les instructions de MAGPUL pour l’installation sur le site officiel de Magpul.22,90 CHFEn stock
M-LOK T-Nut Replacement Set
Spare mounting hardware for all kind of M-LOK accessories.Feature List:• T Nuts made of stainless steel to avoid corrosion.No coating that can wear off or chip away whenmounted and dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.7,90 CHFEn stock
AK47 Gas Tube Cover
The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating109,90 CHFActuellement non disponible en stock
45 Degrees Mount M-LOK
RAIL M-LOK INCLINÉ À 45 DEGRÉS44,90 CHFActuellement non disponible en stock
AUG MSM 10 Slot Rail
Les systèmes de montage modulaires de Clawgear sont conçus pour augmenter la performance et la précision de l'arme. En raison de sa construction de matériaux exceptionnelle, cet article robuste et de haute qualité vous servira dans toutes les situations de combat.Rail OTAN STANAG 4694Le rail Picatinny à 10 fentes permet à l'utilisateur d’upgrader son fusil AUG équipé d'un dispositif de montage modulaire avec des accessoires supplémentaires.SurfaceAluminium allié avec revêtement anodisé (MIL-8625-F type III, classe II) pour usage intensif.Ce rail s'adapte au montage lunette AUG Modular Scope Mount (numéro d'article : 20114).29,90 CHFActuellement non disponible en stock
M-LOK 5 Slot Rail
Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 5 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.24,90 CHFActuellement non disponible en stock
45 Degrees Mount Keymod
RAIL KEYMOD INCLINÉ À 45 DEGRÉS44,90 CHFActuellement non disponible en stock
M-LOK 9 Slot Rail
Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 9 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.32,90 CHFActuellement non disponible en stock
Trier :